9V Battery Charger, 2 Bay + 2x NIMH 200mAh 9 volt Rechargable Batteries

Features:

1. Specifications:
   • Charging 1 or 2 9V batteries only.
   • Two-way parallel constant current charging mode.
   • Continuous charging.
     • Input: AC110V 50HZ SW
     • Output: 9V 20mA
   • Using temperature: 10 - 40°C
2. Charging Method:
   • Insert batteries correctly. Make sure that the "+" and "-" terminals are aligned properly. Put the charger into the correct household AC electronic outlet, the red led will light up for proper charging.
3. Charging Status:
   • The red led will light up when the batteries charging, and it will continously charge.
   • This is a trickle charger, it takes about 12 hours to charge a standard 200mA battery.
   • The charger does not indicate a fully charged battery.
4. Charging time:
   • 9V 80mA - 4 hours
   • 9V 120mA - 6 hours
   • 9V 200mA - 12 hours
5. Note:
   • Don't move the batteries or cut off the power
   • If you do, it will affect the result
   • Do not insert the batteries if is not charging
   • For indoor use only
   • Far away from children
   • 10 - 40°C is the best charging temperature enviroment
   • Do not use other type or bad batteries
   • Far away from fire or strongly sunlight

Warnings:

• For 9V (6F22) batteries only
• For indoor use only. Do not expose charger to moisture or high temperature
• Always unplug the charger from outlet before attempting maintenance or cleaning
• Charger operation temperature 10 - 40°C

Current Solutions, Inc.
P.O. Box 320542
Tampa, Florida 33679
©Current Solutions www.CurrentSolutionsNow.com