Accu-Chek Softclix Lancets - 100 ea

Uses:

For use with Accu-Chek^® Softclix lancing device

Package Includes:

• 100 Lancets

Directions:

1. Remove the cap from the lancet device.
2. Insert a new lancet in the lancet holder. It is properly positioned when it snaps into place. To remove the protective cap, twist and pull it away from the lancet.
3. Replace the cap onto the lancet device. Twist the cap of the lancet device to set the lancet depth. Start at 2 or 3. For tougher skin, dial to a higher number.
4. Press the plunger on the end of the device all the way down until it clicks. A yellow dot will appear and remain in the center of the clear release button.
5. Wash your hands in warm, soapy water. Dry well.
6. Hold the lancet device against the side of your fingertip.
7. Press the release button. Gently squeeze the area until you get a small sample of blood.
8. Apply the drop of blood to the target area of your test strip.
9. Immediately remove used lancet. To avoid accidental injury, do not store lancet in device.

Warnings:

• Do not use if protective guard has been previously removed from lancet. Do not re-use lancets or store lancets in device.
• A restricted license limits use of the Accu-Chek® Softclix® Lancet Device. Carefully read the package insert before use.
  
  

Roche Diagnostics
Indianapolis, IN 46256
©2003 Roche Diagnostics www.accu-chek.com